A balanced treatment containing sulfites for hot water boilers and closed systems.

A balanced treatment containing nitrites for hot water boilers and closed systems.

This is a concentrated balanced boiler compound for treating low-pressure steam boilers.

A molybdate-based balanced boiler compound designed to provide scale and corrosion protection for closed chilled-loop, hot water systems and steam boilers.

A molybdate and nitrite-based boiler compound that will prevent scale and corrosion while establishing a protective film in hot water boilers and closed systems.

A neutralizing amine product that protects against rust, pitting and corrosion in steam condensate lines. It is normally used with No. 30 or No. 34 Boiler Compounds.

A concentrated corrosion and scale preventative compound for cooling towers and condenser feed water. It is ideally suited for use in open recirculating cooling towers. It contains anti scaling agents, cathodic and anodic inhibitors and will prevent corrosion of both steel and soft metals. It allows high cycles of concentration by controlling alkalinity.

A concentrated corrosion and scale preventative compound ideally suited for open recirculating cooling towers.

A microbiocide for controlling slime-forming bacteria, sulfate-reducing bacteria and algae in air washers and recirculating cooling water systems; service water and auxiliary systems; heat transfer systems. PCP# 31043.

A broad spectrum anti-bacterial product for use in a variety of applications including cooling towers, crude oil storage tanks, closed heating and cooling loops, fuel storage tanks, humidification spray pans and water disposal wells. PCP# 21153.18

A concentrated sodium sulfite solution used to reduce oxygen in feed water for steam boilers and other water treatment applications.

A catalyzed concentrated sodium sulfite product for rapid oxygen reduction in steam boilers and other water treatment applications.

A concentrated highly alkaline non-freezing corrosion preventative boiler compound for oil patch use.

A balanced treatment containing sulfites to protect against scale and corrosion in boilers. It is ideal for food plant use.

A water softening detergent with a pH of 7.5 to 8 designed for degreasing and cleaning aluminum boiler systems.

A concentrated non-foaming non-phosphate detergent-degreaser for cleaning boilers. It contains silicates and is ideal for the removal of residues often found in new boiler installations.

A full strength, chelating agent to control hardness and heavy metal ions in larger boiler systems.

This product is a phosphated product used for preventing scale in boilers and feed lines by sequestering calcium and magnesium complexes. It is also an excellent corrosion protection additive especially when used with an alkaline boiler compound.

A scale-conditioning additive that will inhibit the formation of hard scale deposits. It is ideally suited for use with other additives in larger boiler systems.

A nitrite-based boiler compound with a controlled pH of 8 for the treatment of aluminum boiler systems that operate at pressures of less than 900 psi.

This product is a Ready-To-Use scale inhibitor that prevents hard water scaling in pressure washer heating coils. It is safe to use on all surfaces and is compatible with all pressure wash detergents.

A product to thoroughly flush closed loop boilers and heat transfer systems. It degreases steel and suspends particulate matter for easy flushing. The solution sits at a neutral pH for safe handling and the biodegradable substituents leave little impact on the environment.

This all-in-one steam boiler compound provides excellent corrosion and scale protection for steam boilers and condensate lines. This molybdate-based product creates a protective film while a blend of neutralizing amines provides protection for steam and steam-condensate lines. It also contains mud-sequestering polymers and chelating agents for scale inhibition and prevention.

This all-in-one product will protect against scale, rust, pitting and corrosion in steam boilers and steam condensate lines. It contains a blend of film-forming and neutralizing amines to create a hydrophobic film and control condensate pH to protect the entire system. It is ideally suited for food plants and other industrial use.